Ok guy's i have a Serious Question for you all.
I have placed a order for 6 Gallon's of Second Skin Spectrum Liquid will this be a nuff to do a good job on the door's and boot on a Vectra ?. Are should i get some sort of matting to ?.

You've got enough to cover 120 sq/ft :lol:

ok cool on the othere thread it says its 40sq'ft a gallon so i work that out to 240sq'ft then 2 layer's so yer 120sq'ft

ok cool on the othere thread it says its 40sq'ft a gallon so i work that out to 240sq'ft then 2 layer's so yer 120sq'ft

Ah yes, I was thinking of the firewall stuff. :)

do you think there will be enough to do a Vectra ?

240sq ft just for the doors and boot :o

i would say thats plenty

My complete guestimate would be that 100sq/ft would be enough to give the doors, floorpan and boot 1 coat.

ive done my boot today,, and basically i laid down 36 sqft of damplifier pro,,, and went over it with 36.... i had more then half the bucket left, and went over again,, and again,, and again,,, and i done the rear passenger seat base, and rear wings from inside the cabin,,, and still got some left over!

all in loads of coats,, though equivelent to around 1-2mm depth...

ive done my boot today,, and basically i laid down 36 sqft of damplifier pro,,, and went over it with 36.... i had more then half the bucket left, and went over again,, and again,, and again,,, and i done the rear passenger seat base, and rear wings from inside the cabin,,, and still got some left over!

all in loads of coats,, though equivelent to around 1-2mm depth...

So are You happy with it and you got any pic's ??

I think im going to use some body line matting for the boot and maybe some Second Skin Damplifier / Second Skin Overkill
In the door's to fill the gap's so i get some nice mid bass going on

Just got mine today on 1 gallon though. worked out doors are near enough 12 sq ft so 24 for both so 1 and 3/4 coats should be start and then a coat of sludge when that arrives.

Got mine to day the delivery guy almost died carrying the box.
Only had one problem they must have droped it at some point as one of the tub's was FCUKED and most of contents was all over the box and a tub's next to it. But phoned CAD up and Mike the star that he is sorted the problem out right a way. And is getting me a new one sent out. So thank's to Mike for being so helpful and sorting the problem out so fast. Top notch customer service

I got mine the other day :)

ive put on loads of layers of spectrum,,, personally i prefer sludge,, i think sludge is much better, less coats needed,, less effort better damping,, though still not as easy as the matting, neither is it as straightforwardly good as damplifier pro

damplifier pro,,, chuck it on. and u notice the diference straight away.

spectrum... layer.... and layer... and layer... and layer... really need to build it up before noticing a major difference.

spectrum sludge,,, like spectrum, but without so many layers..

i think a good combination is the damplifier pro, plus spectrum or sludge plus spectrum. or loads of sludge,..

id trying to keep under the 4mm rule,,, then you might have to stay to matting +/- spectrum/sludge.

use sludge and you will have to go over 4mm to get the same effect as the matting would.

just my input :) i like the finish they give to the car! makes it look semi factory! better then shiny stuff all over!

How did you apply the spectrum dark_sounds?

As i say dark im going to use body line matting stuff in the boot as a foundation then im going to add around 2 gallon's of the SS on the top and the sides. I may get a pack of Second Skin Damplifier to fill the gap's in the door's then just coat it in SS. And last but not least ad a nice roll of Second Skin Overkill to finish of the door's

Jonas im going to get somthing like this a electric spray gun. There only £6 so not a problem if it dont work lol.
http://www.silverlinetools.com/images/library/stock/webbig/598473.jpg

cool man, you know where you get them from??

i think a combination of products is good, sounds like your ognna have a good sound deadening . how much u spent on deadening so far??

£200 all in

just for the boot,, or 200 for boot and doors??

Would the spectrum be too viscous for one of those sprayers? I haven't opened mine up yet but other people have said it's not exactly runny.

its like paint house paint, tbh, its not runny runny,, but its thick like paint ull do inside with.

just for the boot,, or 200 for boot and doors??
Boot and door's but that's just on the SS so say around £100 more to do the job i should think

Guy's if you wont a gun let me no and ill get a price on one for you.As i say around £5.99 i think

ok got a gun it was 6.99 i think